Installation

Follow these steps to install the Fauna XL Cargo Cage on a compatible frame or fork mount.

Before You Start

It is common for paint or powder coating to partially fill cargo mount threads. If a bolt resists threading in by hand, try installing the bolt by itself first to clear the threads before attaching the cage.

Caution

The XL Cargo Cage can put more stress on your frame or fork mounts than a smaller cage. Confirm your bike is rated for the loads you plan to carry, and contact the manufacturer if you are unsure.

Installation Steps

1. Position the cage: Hold the backplate against the mounts. Use the horizontal slot if your mounts are slightly misaligned, and make sure the cage is oriented with the open side facing forward.

2. Add spacers if needed: For recessed carbon fork mounts, place the included TPU spacers between the cage and the mounting surface.

3. Position the foot: Mount the foot where it best supports your load. For long items like tent poles, remove the foot entirely. For shorter items like bottles or small dry bags, mount the foot near the bottom of the cage.

4. Thread the bolts: Insert the M5 bolts through the cage, spacers, and into the mounts. Start all bolts by hand before tightening. If you have a torque wrench, tighten to 5-6 Nm. Otherwise, tighten securely without over-tightening.

5. Secure your load: Strap your bottle, bag, or gear into the cage and verify it cannot shift while riding.

Final Checks

• Recheck bolt torque after your first ride.
• Confirm straps stay tensioned and the load does not contact the wheel, frame, or fork.
• Stay within the recommended load limit of 6 kg (13.2 lbs).
• If bolts loosen over time, consider applying a small amount of threadlocker.